pp equal tee compression fittings with pn16

***Fields of application

PP equal tee compression fittings are designed specifically for connecting polyethylene pipes with an outside diameter of 16-110mm. They are fully compatibale with all PELD,PEHD,PE40,PE60,PE80 and PE100 pipes complying with EN 12201,ISO 4427,ISO 14236, ISO 13460, DIN 8074.they are normally used to convey drinking water and fluids at pressures up to 16 bars for generic applications. The quality of the materials used makes these fittings resistant to etching by numerous chemical substances and to UV-rays, The PP coupling fittings can be used to connect systems using PE metric piping with existing pipes made of any material,with external diameters of 15-34mm.

***Standards

• Fittings and saddles: complying with UNI 9561,UNI 9562,DIN 8076-3,ISO 14236, ISO 13460

• Threads:complying with ISO 7/1,DIN 2999,BS21

• Flanges:complying with UNI 2278, DIN 8063



***Operating temperatures


PP equal tee compression fittings are not suitable for use with hot water for the limits dictated by the use of polyethylene pipes.

Maximum operating temperatures refer to the use of polyethylene pipes; it is therefore necessary to refer to the regulations applicable in the country of use. The PP coupling fittings can withstand temperatures below 0ºC. The table below shows the maximum operating pressure during continuous operation (PFA) with changes in temperature if the liquid conveyed is water,in compliance with EN 805,EN 12201 and ISO 13761. For values falling within the set range, a linear interpolation can be obtained.

Operating T (ºC)	≤20ºC	25ºC	30ºC	35ºC	40ºC	45ºC
PFA(bar)	16	14.9	13.9	12.8	11.8	10.8
PFA(bar)	10	9.3	8.7	8	7.4	6.7

***Packing of PP equal tee compression pipe fittings details

size	qty/carton	cartons size			n.w.	g.w.
	pcs	cm	cm	cm	kgs	kgs
20mm	96	50	30	26.5	10.66	11.36
25mm	54	50	30	26.5	9.99	10.69
32mm	27	50	30	26.5	7.07	7.77
40mm	20	50	30	29	9.12	9.82
50mm	9	50	30	26.5	7.33	8.03
63mm	7	53	31	30	9.96	10.66
75mm	6	49	36	38	10.30	11.00
90mm	4	56	30	43	11.90	12.60
110mm	3	51	36	55	15.83	16.53

***Materials of pp compression fittings






Part	Material	Colour
Body (A)	Polyprolylene block copolymer(PP-B)of exceptional mechanical properties even at high temperature	Black
Nut (B)	Polypropylene with dye master of high stability to UV rays andsolidity to heat (8 grade according to standard DIN 54004)	Blue
Clinching  Ring (C)	Polyacetal resion (POM) with high mechanical resistance and hardness	White
Blocking  Bush (D)	Polypropylent	Black
O Ring  Gasket (E)	Special elastomeric acrylonitrile rubber(NBR) for alimentary use	Black
Reinforcing Ring	AISI 430(UNI X8Cr17,W.nr 14828) stainless steel for female threads from 11/4" to 4"

***Our packing and container shipping



***Our workshop