pp 90 degree male with brass threaded insert compression fittings

1.FIELDS OF APPLICATION

PP compression fittings and clamp saddles are designed specifically for cinnecting polyethylene pipes with an outside diameter of 16-110mm (135mm for clamp saddles). They are fully compatible with all PELD,PEHD,PE40,PE80 and PE100 pipes complying with EN12201,ISO4427,ISO14236,ISO13460,DIN8074. They are normally used to convey drinking water and fluids at pressure up to 16 bar for generic applications.The quality of the material used makes these fittings resistant to etching by numerous chemical substances and to UV-rays. The PP universal fitting can b e used to connect systems using PE metric piping with existing pipes made of any material,with external diameters of 15-34mm.

2.STANDARDS

1).Fittings and saddles:Complying with UNI 9561,UNI 9562,Din 8076-3,ISO 14236,ISO 13460

2).Threads:Complying with ISO7/1,DIN 2999,BS 21

3).Flanges:Complying with UNI 2278,DIN 8063

3.Operating temperatures

PP 90 degree male with brass threaded insert pipe fittings are not suitable for use with hot water for

the limits dictated by the use of polyethylene pipes.

Maximum operating temperatures refer to the use of polyethylene pipes; it is therefore necessary to refer to the regulations applicable in the country of use. The PP coupling fittings can withstand temperatures below 0ºC. The table below shows the maximum operating pressure during continuous operation (PFA) with changes in temperature if the liquid conveyed is water,in compliance with EN 805,EN 12201 and ISO 13761. For values falling within the set range, a linear interpolation can be obtained.

4.SPECIFICATIONS OF PP 90 DEGREE MALE WITH BRASS THREADED INSERT COMPRESSION FITTINGS

dxG	D	L	I	L1	H	PN
20x1/2"	45	68	54	64	14.5	16
20x3/4"	45	68	54	66	16	16
25x3/4"	55	80	64	66	16	16
32x1'	63	93	71	86	29	16
40x11/4"	79	109	82	87	23	16
50x11/2"	94	130	101	94	30	16
63x2"	115	167	126	118	37	16

5.OUR WORKSHOP

6.OUR PACKING

7.WE ARE EXPORTING THE FOLLOWING COUNTRIES